Loading ...
Loading ...
3
PACKAGE CONTENTS
PART DESCRIPTION QTY. PART NO.
A 1/4-20 X 1/4” Machine Screw 2 10-09-115
B 1/4-20 X 1/2” Thread Cutting Screw 2 10-09-116
C 1/4-20 X 2” Thumbscrew (for lintel clamp) 2 10-09-117
D Lintel Clamp 2 10-04-122
E Key Bracket 2 10-04-123
F 8-32 x 5/8” Machine Screw (only for Riser Bar) 2 10-09-118
G 8-32 Hex Nut (only for Riser Bar) 2 10-09-119
H Pressure Bracket 2 10-04-124
I 1/4-20 X 3 1/2” Thumbscrew (for pressure bracket) 2 10-09-120
J&K Fiberglass Insulation (2” & 3” wide) 1 Bag 10-06-100
L Handles with Screws 2
M Riser Bar 1
Some parts and specications may change without notice.
H
E
D
G
F
K
C
B
A
J
M
I
NEUTRALIZE THE HEARTH:
Newly-built replaces often contain a residue of acid used during construction. If allowed to remain in the
pores of the brick, this acid will release a gas that rusts iron and creates pitmarks or red spots. If your
builder has not neutralized the replace, follow these instructions prior to installing your Glass Door.
1. Brush a mild solution of household ammonia on all brick, stone, or cement
surfaces in your replace.
2. Remove all neutralizing solution by rinsing thoroughly with warm water,
followed by several cool rinses.
L
TOOLS REQUIRED:
Phillips and Flathead Screwdrivers, Scissors, Measuring Tape, Gloves
Loading ...
Loading ...
Loading ...