Loading ...
Loading ...
Loading ...
Replace the Tank Cap by
rmly turning clockwise until
tight. Turn the Water Tank
upright and check the Tank
Cap for leaks. If any water
drips, remove the Tank Cap
and retighten.
WARNING:
DO NOT place Water Tank on
the humidier Base if the cap
is leaking.
When replacing the Water Tank
on the Base, lift the handle up
and align the notches on the
front of the Water Tank and
Base. Ensure the tank is rmly
seated.
Make sure the handle is
snapped back into place, then
turn the Water Tank upside
down and remove the Tank Cap
by turning it counter clockwise.
Remove Extension Nozzle and
Dual Directional Mist Nozzle
prior to lling the Water Tank.
1
Lift the Handle on top of the
Water to remove the humidier
from the Base.
2 3
4
4
5
6
Filling The Water Tank
WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER ll the Water Tank from the top of the unit. Follow Water Tank
lling instructions in #4.
Filling the Water Tank:
Use clean, cool, tap water.
WARNING: DO NOT
use
extremely cold water, since it may
temporarily reduce the mist output.
WARNING:
NEVER ll with
hot/warm water or use additives
as this could damage the unit and
void the warranty.
WARNING:
IIf you have hard tap water use our
Humidier Demineralization (hard
water) Filters (available at www.
Air-Innovations.com) or use ONLY
ltered, distilled, cold boiled or
bottled water.
7
Attach the Dual Directional Mist Nozzle or
Extension Nozzle & Dual Directional Mist Nozzle
together to the top of the Water Tank. To easily
control the direction of the mist simply separate
the Dual Directional Mist Nozzle and position as
desired-see photo above.
Loading ...
Loading ...
Loading ...