Loading ...
Loading ...
Loading ...
5
QUICK TIPS
• When using your blending tumblers,
ingredients are put in from hardest to softest
e.g. ice cubes, frozen fruit, spinach, milk etc.
• Cut most foods into 2-3cm pieces to achieve
the most consistent results.
• If food sticks to the sides of the tumbler when
blending, stop the blender and carefully
scrape down the food and replace blade to
continue blending again to combine.
• When blending thicker mixtures, lightly hold
down the top of the tumbler to prevent
jumping.
• After blending, flip the tumbler over so that
the blade assembly is on the top. Gently tap
the tumbler a few times to prevent any
spillage. Remove the blade and replace with
lid.
• Some recipes may require more than a
minute of blending. Simply start blender
again, once the minute of continuous
blending has elapsed.
OPERATING INSTRUCTIONS
BATTERY LIFE
Before the first use of this appliance, the
batteries must be charged until all 3 blue battery
indicator lights illuminate. With a full charge,
your blender will run for approximately 20
minutes, depending on the ingredients.
Your Blender will be fully charged in
approximately 2 hours.
BATTERY-LIFE INDICATOR
When Battery-Life Indicator/LED Light Bar
displays 3 solid blue power lights, battery
capacity is 95%.
NOTE: 95% charged for a lithium-ion battery is
considered fully charged.
TOP-UP CHARGE FEATURE
Your Cordless Rechargeable Personal Blender is
equipped with a top-up charge feature. If your
motor base runs out of power, you can “top-up”
your blender:
• Charge for 15 minutes to get 25 seconds
of runtime.
• Charge for 30 minutes to get 1 minute
and 45 seconds of runtime.
• Charge for 60 minutes to get 5 minutes
and 45 seconds of runtime.
• Charge for 2 hours for 20 minutes of runtime
(full charge)
NOTE: Do not leave your blender uncharged for
an extended period of time, as it will affect the
life of the rechargeable battery.
1. Place food ingredients in the tumbler
ensuring you do not fill past the max-fill line.
2. Place tumbler on flat surface then attach
blade on round opening of the tumbler to
turn clockwise until tightened.
3. For continuous operation press the power
button once so the LED lights are illuminated
then press again to turn blender on.
NOTE: Maximum runtime of a single blending
cycle is one minute.
4. Press once more to turn off.
5. When you have finished blending, press the
Power button to turn OFF. Remove the
tumbler from the base.
6. Turn tumbler right-side up then turn blade
counterclockwise to remove.
Battery Capacity Indicator
70%-95%
First & second lights are
solid & third light is
flashing.
40%-70%
First light is solid & second
light is flashing.
< 40%
First light is flashing &
others are off.
Loading ...
Loading ...