Loading ...
Loading ...
Loading ...
en Automatic safety cut-out
36
Setting the correct time
Use the 3 symbol to select the kitchen timer and reset
the time.
bAutomatic safety cut-out
Au t o mat i c safety cut - out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating. ”‰ and the •/œ residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
zKeep warm function
Ke e p wa r m f unct i on
The Keep warm function is suitable for melting
chocolate or butter and for warming food and cookware
Switching on the keep-warm function
1. Select the hotplate.
2. Touch the L symbol.
– appears in the heat setting display. The keep-warm
function is switched on.
Switching off the keep-warm function
1. Select the hotplate.
2. Touch the L symbol. ‹ lights up on the heat setting
display.
The keep-warm function is switched off.
kWipe protection
Wipe pr ot ect i on
If you wipe over the control panel while the hob is
switched on, settings may be changed.
To prevent this from happening, your hob has a wipe
protection function. Touch the z symbol. A beep goes
off. The display light above the z symbol lights up. The
control panel is locked for 30 seconds. You can now
wipe over the control panel without changing any
settings.
Note: The primary switch is not affected by the wipe
protection function. You can switch off the hob at any
time.
[Energy consumption
indicator
Ener gy consumpt i on indicator
You can use this function to display the total energy
consumption between switching the hob on and off.
Once switched off, the energy consumption is displayed
in kilowatt hours (e.g. 1.08 kWh) for 10 seconds
The accuracy on the display depends on the voltage
quality of the power supply, among other factors.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 36
QBasic settings
Ba s i c set t i ngs
Your appliance has various basic settings. You can
adjust these settings to meet your own needs.
Display Function
™‚
Automatic child safety lock
‹
Switched off.*
‚
Switched on.
ƒ
Manual and automatic child safety lock switched off.
™ƒ
Beeping sound
‹
Confirmation signal and operation error signal are
switched off (primary switch signal always remains).
‚
Only the operation error signal is switched on.
ƒ
Only the confirmation signal is switched on.
„
Confirmation signal and operation error signal switched
on.*
™„
Energy consumption display (Ask your electric com-
pany what the mains voltage is)
‹
Consumption display switched off.*
‚
Consumption display with mains voltage at 230 V.
ƒ
Consumption display with mains voltage at 400 V.
„
Consumption display with mains voltage at 220 V.
…
Consumption display with mains voltage at 240 V.
*Basic setting
Æ
Loading ...
Loading ...
Loading ...