User’s Manual & Safety Instructions
Instruction Manual
WARNING! Please read these instructions carefully
before using this tabletop fireplace. Noncompliance
with the safety rules can result in property damage,
bodily injury, or even death.
Thank you for choosing this tabletop fireplace. No
special permits, installation, or construction are
required to enjoy this fabulous fireplace. Nor does
the fireplace require an electrical or gas connection.
This model also includes a burner can with an
opening/closing tool so the fire can be extinguished
safely. A fireplace cover is also included.
Fuel is NOT included. You can use gel fuel cans
with a diameter of up to and including 3.5 inches;
bioethanol fuel; or isopropyl alcohol. You may also
use candles for a longer burning time. You can
expect around 2 to 3 hours’ burn time with gel fuel
cans or around 1 hour burn time with either
bioethanol fuel or isopropyl alcohol, depending on
the fuel used, temperature, and climate. Avoid drafts
for a longer burning time. We do not recommend
using isopropyl alcohol for indoor use.
This fireplace is meant for decorative purposes.
Before Using the Tabletop Fireplace:
• Be sure to have a fire extinguisher near your
fireplace.
• Keep extinguisher tool provided near the fireplace.
• The fireplace is not suitable for heating purposes.
• Ensure that flammable products and materials
(curtains, furniture, etc.) are at least 100cm/40"
from the fireplace.
• The fireplace must only be put on a solid
nonflammable surface.
• Please remove all packaging and informational
material before use.
• Keep children and pets away from the fireplace.
• Do not place any flammable materials or clothing
on the fireplace.
• Do not smoke while lighting the fireplace.
• Do not use any petroleum products (oil, gasoline,
etc.) near the fireplace.
• Do not use the fireplace in RVs, boats, or vehicles.
• The fireplace must be used strictly on a horizontal
and flat surface. When placing the fireplace on a
table, make sure it is placed away from the edges.
• Do not use the fireplace in unventilated rooms. The
room should be well ventilated with enough
oxygen and fresh air being supplied.
• People with breathing problems should consult
their doctor before use.
• Do not burn in a confined space.
• Exercise care when using outdoors. Do not burn
during high winds or when it is raining or snowing.
• Do not obstruct or inhibit the flame.
• We do not recommend placing the fireplace in a
bedroom or bathroom. For indoor use, only use
this fireplace in large, well-ventilated rooms. For
indoor use, we recommend using gel fuel cans.
• Do not store fuel near a tabletop fireplace.
• Do not use the fireplace if flammable gas is in
the room.
• Do not use the fireplace under overhanging items
such as TVs, paintings, or shelves.
• Do not place charcoal, wood, paper, or other
combustible items into the burner can.
• Do not move the fireplace while it is still operating
or is still hot.
Starting Up
WARNING! Before lighting, clean up any fuel that
may have spilled and make sure any surface
moisture from spillage is gone or has evaporated to
prevent spillage ignition.
Gel fuel can:
• When using gel fuel cans, remove the paper label
from the outside of the can, pry open the lid of the
gel fuel can, and put the can in the hole in the
center of the fire pit. Then light the gel with a long-
reach lighter or long matches.
• Cans can be resealed with cans lid and saved for
future use.
Burner can with bioethanol fuel or isopropyl
alcohol:
• Put the burner can included with the fireplace in
the hole in the center of the fire pit.
• Fill burner can with either bioethanol fuel or
isopropyl alcohol up to a maximum of around 2/3
of a can. For indoor use, fill it up to a maximum of
1/2 of a can.
• We recommend putting only as much fuel as you
intend to use in the burner can. Leftover fuel in the
burner can should be disposed of in accordance
with regulations for hazardous materials.
• Make sure the burner can is cool to the touch
before pouring in the fuel.
CAUTION: Spilled fuel may stain wood flooring.
ATTENTION: Remove fuel from the area around the
fireplace before lighting the fireplace.
ATTENTION: To ignite the flame, use a long-reach
lighter or long matches. Be sure to keep an arm’s
length away when lighting.
Loading ...
Loading ...
