Loading ...
Loading ...
Loading ...
!
CAUTION
Weight of overlay door panel must not exceed 15
pounds (6.8 kg).
Loosen (do not remove ) these
2 phillips head screws on the
top and bottom hinges
Cabinet
"Z" Bracket
"P" clamp
and screw
Wire connector
see
Bottom of
door
Press and hold down this
tab on the wire connector
and pull the connector apart.
OVERLAY DOOR PANEL INSTALLATION - MP15C MODELS ONLY
Step 2: Remove the door gasket
corner of the door remove the magnetic door gasket from
it's retainer by pulling it away from the interior side of the
.
each side and 2 at the top and bottom which are used to
fasten the panel to the front of the door. The screws are
provided in the literature pack.
Overlay panel
of door.
Magnetic Gasket
remove starting at a
away from the door.
Holes in
gasket
retainer.
Figure 33a
Figure 33
Step 3: Cut and drill the overlay panel
Depending on your model cut the overlay door panel to
the dimensions shown in the images on the next page.
Loading ...
Loading ...
Loading ...