Loading ...
Loading ...
Loading ...
13
newair.com
able to set the timer between 0-12 hours by pressing on the (to
increase time) or (to decrease time).
i. The time will be added or subtracted by one hour with every press,
when you press the or key, and the press length is more
than two seconds.
ii. You can reset the time by pressing the key once and the timer
starts flickering, then press the or key and the timer that
you set will take effect.
b. By pressing the key twice, the temperature indicator key will
show and the LED light will start flickering (It takes five seconds for it to
go to the default standby mode) at this time you will be able to set the
temperature anywhere between 41
o
F - 95
o
F by pressing the (to
increase the temperature) or (to decrease the temperature).
i. The temperature will be add or subtract 1
o
F with every press when
you press the or key, and the press length is more than two
seconds.
ii. You can reset the temperature by pressing the key twice, then
press the or key and to set the timer.
NOTE: If there is no response to the keys after five seconds, or other keys are
pressed, except the , , or keys, the digital tube will display the
temperature being set right away.
c. After turning on the machine, the temperature function will be
activated within ten seconds. After ten seconds, if the temperature is
above the set temperature (+ 5
o
F), the space heater will be turned off
and the heating power wattage will not be displayed. The fan will turn
off after ten seconds (if previously turned on), then display the set
temperature. If the temperature is below the set temperature (-5
o
F),
the space heater and fan will restart (if the fan is already running, then
within the ten seconds delay time, the fan will continue to work), and
the heating power wattage will be displayed.
Loading ...
Loading ...
Loading ...