Loading ...
Loading ...
Loading ...
Reversingthe doorswing.
Read these instructions completely and carefully.
ReversingtheHardware
[_ Transfer Bottom Hinge Bracket to the Left (Forfreezer swing door models only.)
[_-]Pull out _'ille 1" (25 mm) and setit down on the
floor to gain access to the hinge bracket screws.
Plastic
[--_Using a 3/8" socket, remove the hinge bracket,
screws, plastic washer and spacer shim fi'om the
bottom right side of the cabinet.
BottomRight
[-_ Remove plug button and screw from the
bottom left side of the cabinet and install at
the bottom right.
[---_Reinstall the spacer shim, hinge bracket,
screws and plastic washer to tl_e bottom left
side of the cabinet.
Plastic
BottomLeft
_-_ Transfer Center Hinge Bracket to the Left
[-_ Remove the center hinge bracket and shim by
removing the three screws. NOTE:Keep these
screws _ith the hinge bracket. They are longer
screws and will be used when installing the hinge
on the other side.
[--_Remove the fllree painted screws and take
washers from tim center left side of the cabinet.
Screw them into the holes on the tight side,
which were uncovered in Step "a" above.
[-_ Place the center hinge bracket and shim over
the holes at the center left side of the cabinet.
Insert the three screws that were removed with
the center hinge bracket in Step "a" and
tighten securely.
Do not install the hinge pin yet.
Center Left
Transfer Top Hinge to the Left
Interchange hinge and shim at top right with two
plug buttons at top lef_of cabinet. Do not tighten
screws on hinge side at this time.
14
Loading ...
Loading ...
Loading ...