Loading ...
Loading ...
Loading ...
4 49-5000612 Rev. 1
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Controls
A. CONTROL PANEL DISPLAY
Displays the Set Temperature in degrees Fahrenheit.
The corresponding indicator light will illuminate.
B. Power Button
Turns ON/OFF power to the air conditioner.
NOTE: Turning off power by pressing the Power button
does NOT disconnect the appliance from the power supply.
• Press the Power button.
The Power indicator will illuminate.
C. Mode Button
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
Cool – Cools the room to the set temperature
Dry – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling.
D. Remote Control Signal Receiving Window
Aim the Remote Control at this window so the Control
will receive the signal.
E. Up and Down Arrow Buttons
Adjusts the Temperature or Hours in Time Delay.
To Set the Temperature:
The temperature can be set between 64ºF and 86ºF
&DQG&ZKHQWKHDLUFRQGLWLRQHULVLQ&RROPRGH
1. Press the Mode button until the Cool mode is
selected.
2. Press the Up Arrow or Down Arrow buttons to
select the Temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or Dry mode.
F. Fan Speed Button
The fan speed can be adjusted from Low speed,
Medium speed, to High speed when the air conditioner
is either in Cool or Fan mode.
NOTE: The fan speed cannot be adjusted when the
unit is in Dry mode.
• Press the Fan Speed button to toggle among the
three speeds. The corresponding fan speed indicator
will illuminate.
1. Continuous Fan Mode
To activate continuous fan mode, press and hold Fan
Speed button for 3 seconds and release. “CF” will
show on display for continuous fan mode. When set
temperature is achieved, indoor fan will continue to run.
G. Timer Button
3URJUDPDWLPHIURPKRXUWRKRXUVIRUWKHDLU
conditioner to turn Off or On. When a Time Delay is
programmed, the Timer indicator light will illuminate.
While the air conditioner is operating:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the
number of hours you want the air conditioner to
continue to operate before turning Off.
NOTE: Wait approximately 5 seconds for the Turn-Off
time to be saved.
While the air conditioner is off:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the
number of hours you want the air conditioner to
remain off before turning On.
NOTE: Wait approximately 5 seconds for the Turn-On
time to be saved.
To cancel the timer:
• Press the Timer button once, the hours remaining will
flash, press the Timer button again and the timer will
be canceled.
H. WiFi Connect Pad (on some Models)
1. Press and hold the Timer button for 3 seconds to
connect the app or disconnect the app.
2. Connect your air conditioner to WiFi router. Refer to
the “WiFi Set up” section for more information.
Controls
USING THE AIR CONDITIONER
Loading ...
Loading ...
Loading ...