Summit SLW241W 2.3 cu. ft. 24 Inch Front Load Washer

User Manual - Page 19

For SLW241W.

PDF File Manual, 24 pages, Read Online | Download pdf file

SLW241W photo
Loading ...
Loading ...
Loading ...
19
E10
Water level sensor error
Unplug the power cord from the outlet.
Then, plug the power cord back into the
outlet, and turn the washing machine on.
If the error reoccurs, call a service
technician.
E11
Water overflow error
If there is water in the drum that exceeds
a certain level, and an error is reported
on the display unit, the washing program
will be stopped and the water will be
pumped out of the washing machine.
Restart the program.
If the error reoccurs, call a service
technician.
If there is water in the drum that exceeds
a certain level, an error is reported on
the display unit, and the washing
machine continues to add water, close
the water tap and call a service
technician.
E12
Motor control error
Restart the program. If the error
reoccurs, call a service technician.
E22
Error while locking the door
The door is closed, but it cannot be
locked. Turn the washing machine off.
Turn the machine back on and restart
the washing program.
If the error reoccurs, call a service
technician.
E23
Error while unlocking the door
The door is closed, but it cannot be
unlocked. Turn off the washing machine,
then turn it back on. If the error reoccurs,
call a service technician. To open the
door, see the INTERRUPTIONS AND
CHANGING THE PROGRAM section.
E36
Electronics communication failure in
the washing machine
Unplug the power cord from the outlet.
Plug the power cord back into the outlet,
and turn the washing machine on.
If the error reoccurs, call a service
technician.
E37
Electronics communication failure in
the washing machine
Unplug the power cord from the outlet.
Plug the power cord back into the outlet,
and turn the washing machine on.
If the error reoccurs, call a service
technician.
Water drain system alert
Symbol will appear
Alert about reduced water flow in the
pumping stage. Check the following:
Is the pump filter clean?
Is the discharge hose clogged?
Is the drain clogged?
Is the discharge hose placed
between the maximum and the
minimum height (see chapter
»INSTALLATION AND
CONNECTION/Connecting and
Loading ...
Loading ...
Loading ...