Loading ...
Loading ...
Loading ...
Page 6 of 21
Switches the device on and off
Switches the unit to maximum airflow. The display will show a letter H and airflow
will increase. Press again to exit maximum airflow mode.
Switches UV sterilisation on and off. UV sterilisation will shut down automatically
after 1 hour
Switches the oscillation function on and off. The fan can swing 80° left and right.
These buttons increase and decrease the air volume. There are 9 speed settings.
Sets the timer for 1 to 8 hours. During this period functions of the remote can be
used normally. Switching the device off cancels the timer.
To avoid any potential interference with other devices, keep the remote control away from other
electronic devices during operation.
INSTALLATION
•
Before first use please install the filter (see page 8).
•
Ensure the fan is used on a flat, level base. Do not place it on a slope or a soft surface where
it is likely to tip over.
•
Avoid blocking the air inlets when in use. Keep well away from curtains.
•
Keep objects at least 30cm away from the air outlets otherwise the effect of the fan could be
impaired
Loading ...
Loading ...
Loading ...