Loading ...
Loading ...
Loading ...
QUICK START GUIDE
10
u-line.com
Control Quick Guide
Actual Display:
First Use
All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
NOTICE
U-Line recommends discarding the ice produced
during the first two to three hours of operation
to avoid possible dirt or scale that may dislodge
from the water line.
When plugged in, the unit will begin operating under the
factory default setting. Follow the on screen prompt for
language selection and temperature units.
To turn the unit off, press and hold for 5 seconds and
release. The display will show a countdown to switching the
unit off.
To power your unit on, simply press and the unit will
immediately switch on.
Ice
ICE CUBE THICKNESS ADJUSTMENT
NOTICE
Ice thickness adjustment should only be made
one increment at a time. Allow ice maker
production to stabilize for 24 hours before
rechecking ice thickness.
Ice is produced in layers resulting in a clear cube. Ice in
bin may develop surface frost which disappears when cube
is placed in liquid.
Ice cubes in any given batch will vary, so it is necessary
to choose cubes from the sample area for comparison
when making adjustments.
Control Function Guide:
FUNCTION COMMAND DISPLAY/OPTIONS
OFF Press and hold Display will count down from 5 to off
ON Press and release Unit will come on immediately
Adjust lighting Press to adjust lighting Press to set low, medium or high
Customer menu Press and hold for 5 seconds Press to scroll through menu
Service menu Press and hold for 5 seconds Press to scroll through menu.
Up
Select
Zone Toggle
Down
Power
ICE PRODUCTION
U-Select Lighting
or
or
or
or
Loading ...
Loading ...
Loading ...