Loading ...
Loading ...
Loading ...
ASSEMBLY
STE P 9- Place assembled spray gun
on holder and place turbo nozzle in stor-
age holder. Hang hose on its holder.
Ho=e
Holder
t_LG.9
BEFORE STARTING THE ENGINE
Before you operate your pressure washer, you should
prepare the engine for the ini_al star_ngo To operate the
engine you v_ill need the relieving:
ENGINE OIL
IMPORTANT: ANY ATTEMPT TO CRANK OR START
THE ENGINE BEFORE ITHAS BEEN PROPERLY SERV-
ICED WITH THE RErJOMMENDED OIL RESULTS IN AN
ENGINE FAILURE.
A 20 oz. bottle of SAE 30 weight oil is included in the parts
car_n. YOU MAY NOT USE ALL OIL IN THE BOTTLE.
NOTE: Wllen adding oil to the engine crankcase in the
future, use only high quality detergent oil rated with API
ser_ce classification SF, SG or SH, rated SAE 30 weight.
Select the oil's viscosity grade according I_ your expected
operating t_mpera_re_
I colder 32°F warmer
5W30 I SAE30
Althoughmutti-viscosit¢ oils (5W30, lOW30, etc,) improve
slarting in cold weather, these multi-viscosity oils v_ll result
in increased bil consumplJon when used above 32°F.
Check your engine oil level more frequendy m avoid possi-
ble damage from running low on oil. Oil sump capacity is
20 ounces.
• PosilJon pressure v_sher so engine is level.
= Clean area around oil fill and remove oil dipstick (Fig.
10).
STEP 10 - Add oil to engine crank-
case. Do not attemptto start engine with-
out a_ oil. '
Should fill I_ FULL mark on dipstick. Use the same
grade oil when oil is changed.
FIG. 10
e
Q
e
Wipe dipslJck clean, insert it into oil fill hole and _ghten
securely. Remove oil dipstick. If oil is not up to FULL
MARK on dipstick, add recommended oil. POUR
SLOWLY.
Wipe dipstick clean each time oil level is checked.
Pour oil from the enclosed bo_e into the oil fill opening.
Install oil dipstick, hand ggh_en securely_
Loading ...
Loading ...
Loading ...