Loading ...
Loading ...
Loading ...
SETTINGUPYOURMACHINE
1. You'll find spool pins on the top
cover,
Pull up the spool pins and place the
spool pin felt on the pins.
2 Plug foot control into machine
receptacle_ Then connect cord into
any 1!0 -" t20 volt A.,C wall outlet.
3 Your Kenmore sewing machine has
been thoroughly oiled at the factory_
Be sure to wipe off'the needle plate
area, bed plate and shuttle carefully
before sewing a garment tt is wise to
practice on a scrap of fabric so any
surplus oil is absorbed.
STITCH SELECTOR
Spool pin felt
Spool pin
There are certain types of stitches that are used more often than others in your garment
construction. Because of their frequent use, you will soon realise the convenience offered
to you by this control.
The desired stitch will be obtained by turning the Stitch Selector Dial until the stitch is
indicated by the red line on the indicator panel.
c3 c3 c3 c3 E3 E3 C3 E3 C3 E3 C3 C3 O E3 E3 E_ E3 C3 C3 C3 []
I',I st,.c.
tli Selector >
Loading ...
Loading ...
Loading ...