GE - General Electric ZIC30GNNII Monogram 30" Integrated Customizable Refrigerator (for Single or Dual Installation)

User Manual - Page 10

For ZIC30GNNII.

PDF File Manual, 68 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10 49-60615-4
Tempered glass shelves in the fresh food
section enable you to make efficient shelf
arrangements to fit your family’s food storage
needs.
To adjust shelves: Tilt the shelf up at the front
and slide it up or down along the back wall to
the placement you want.
Handle glass shelves carefully. Rough
handling of tempered glass can cause it to
shatter.
To remove shelves:
NOTE: To remove a shelf, all shelves under it
must first be removed.
1. Remove any food from the shelf.
2. Remove covers at the bottom of each track.
3. Tilt the first shelf up at the front.
4. Slide the shelf down along the back wall
until you reach the bottom where the notch
is located. Slide the shelf through the notch.
5. Repeat for removing the other shelves.
To replace shelves:
Replace shelves by perform steps 1 through 4
in reverse.
Adjustable
shelves
Vegetable Pan/Shelves
30” Bottom-Freezer
Vegetable
pan
The Vegetable Pan in the fresh-food section
of the refrigerator has LED strip lighting above
the drawer.
There are adjustable dividers with several
different position options. The divider is held in
place by a tab located under the handle, a slot
located on the back wall and a stabilizing rib on
the bottom of the drawer for each position.
To change the divider position:
1. Pull up on the back of the divider to release
it from the slot in the back and off of the tab
in the front.
2. Slide the divider into a new location, making
sure it seats into the rib on the bottom of the
drawer.
3. Pull up on the back of the divider to locate
the front under the tab at the new location.
4. Push down on the back of the divider to seat
it into the slot at the new location.
Lighted
vegetable
drawer shelf
The lighted vegetable drawer shelf provides
lighting for the lower compartments. The lights
are recessed into the shelf to illuminate the
drawers below.
To remove the shelf:
1. Lift the shelf and carefully pull forward to
expose the wires.
2. Unplug the shelf and carefully remove it
from the refrigerator.
To replace the shelf:
1. Carefully set the shelf onto the side rails,
leaving the plug exposed.
2. Plug the shelf into the refrigerator.
3. Carefully slide the shelf into place.
Cover
LED lights are located
under the shelf at the front
Lighted
Vegetable
Drawer Shelf
Lift shelf and
pull forward
Ribs
Tab
Slot
Front
Back
Loading ...
Loading ...
Loading ...