Loading ...
Loading ...
Loading ...
SETTING THE CONTROLS
Temperature
• Your refrigerator has a control pad on the dispenser that
lets you regulate the temperature in the freezer and
refrigerator compartments.
• Initially set the refrigerator control at 37°F (3°C) and the
freezer control at 0°F (-18°C). Leave it at this setting for
24 hours (one day) to stabilize. Then adjust the
compartment temperature as desired.
• Refrigerator Temp Control: 33°F to 46°F (0°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment will become.
• Freezer Temp Control: -6°F to 8°F (-21 °C to -13°C)
When the setting is at a lower number, the freezer
compartment becomes colder. The refrigerator
compartment becomes warmer because less cold a_r
flows into the refrigerator.
Ultra Ice
•When you touch the "Ultra Ice" button, the graphic
[ _ ] will light up in the display and it continues for
24hours. It will automatically shut off after 24hours have
passed.
Or you can stop this function manually by touching the
button one more time.
•This function increases both icemaking and freezing
capabilities.
Dispenser
•You can select water, crushed ice, or cubed
ice by touching o,,_oo,._j,button as you desire.
•There could be some dripping after
dispensing.
It is recommended to hold your cup for a
couple of seconds after dispensing.
A CAUTION: The control display is operated by touch.
Excessive moisture on the display may cause a
malfunction. Please keep display clean and dry.
Filter
• Filter Reset : When the FILTER RESET icon turns on,
you have to change the water filter. Press the FILTER
RESET button for 3 seconds to turn the icon off. You
need to change the water filter approximately every 6
months.
Light / Light Sensor
• If the light is set "Auto" mode, dispenser light will
automatically turn on and off according to the brightness
of room detected by light sensor.
Alarm
• When the power is connected to the refrigerator, door
alarm is initially set off and door alarm display will show
. When you touch _ button, the display will change
to _ and door alram function is now activated.
• When either refrigerator or the freezer door is left open
for more than 60 seconds, the alarm will ding to let you
know the door is open.
• When you close the door, the door alarm will stop
dinging.
• If you want to disable the door alarm function, touch
button then the door alarm display will switched to 4'
Lock
• When the power is initially connected to the refrigerator,
Lock function is off.
• If you want to activate Lock function to lock other
buttons, press and hold _ button for 3 seconds or
sign will be displayed and the Lock function is
more.
now enabled.
• No buttons other than _ button will work even
including dispenser button while Lock function is
enabled.
•To disable the Lock function, press and hold -_z_button
for 3 seconds or more.
Temperature Mode Switch Function(°F <->°C)
• If you want to convert °F to °C or vice versa, press and
hold ....... button and ...........button simultaneously for 5
seconds or more.
ENSURING PROPER AIR CIRCULATION
Do not block air channels with any objects or food for air
circulation to prevent food loss due to the lack of cooling air.
A WARNING: If a door is open, the dispenser does not
work.
16
Loading ...
Loading ...
Loading ...