Loading ...
Loading ...
Loading ...
Figure 20
Placing the Dishwasher/Securing the Dishwasher
SECURING THE DISHWASHER
1 Drive the mounting screw's through the holes in the
_ mounting brackets as shown in Figure 21 for Top or
Side Mount.
2 After the unit is installed in the enclosure, leveled and
/
/ secured, lock the two front leg levelers in place by
driving the enclosed leg leveler locking screws into
each screw boss located in front of the levelers. See
Figure 22.
3 Tighten screws until they are flush with the surface of
the bosses.
f
Top Mount
SideMount
Figure 21
Figure 22
J
J
installation of the Rubber Drain Hose
Adaptor
1 Obtain the Rubber Drain Hose Adaptor and the two
hose clamps from the Dishwasher Installation Kit (do
not substitute).
2 On one outside end of the Rubber Drain Hose
Adapter is a raised rib. insert the dishwasher drain
hose into the end without the raised rib (see Figure
23). Be sure to fully insert the drain hose.
3 Secure the connection with the Spring Clamp (see
Figure 24).
4 Use the Screw Clamp to attach the Rubber Drain
Hose Adaptor to the house plumbing (see Figure 24).
Leg
Leveler
Locking
Screw
Screw
Boss
Rubber Drain Hose Adaptor
Raised Rib (cross section) Dishwasher
/
Connects to house- _/ '_
hold plumbing insert until drain
hose locks in place
Figure 23
Spring
Clamp
Figure 24
11
Loading ...
Loading ...
Loading ...