Loading ...
Loading ...
Loading ...
1. Pull out the bucket a little.
2. Hold both sides of the bucke• with even strength, and pull i out from the unit.
3. Pour the water out.
Removing the collected water
3. Pump draining (on some models)
Water can be automatically emptied into a floor drain or a suitable drainage facility by attaching the pump drain out with a pump drain hose (4’od=114″ , supplied).
Remove the continuous drain hose from the unit and install the plastic cover to the continuous drain hose outlet of the unit by clockwise rotation.(See Fig.11)
Resort the pump drain hose into the pump drain hose outlet for a depth of 15mm at least (See Fig.11), then lead the water hose to the floor drain or a suitable drainage facility.
Press the pump pad of the unit to activated the pump operation. When the bucket is full the pump starts to work.
NOTE: The pump may cause big noise when it starts to work for 3-5 minutes. It is a normal phenomenon.
Make sure the hose is secure so there are no leaks.
Direct the hose toward the drain, making sure that there are no kinks that will stop the water from flowing.
Place the end of the hose into the drain and make sure the end of the hose is level or down to let the water flow smoothly. Do never let it up.
Select the desired humidity setting and fan speed on the unit for pump draining to start.
NOTE: The pump operation on light blinks at 1Hz when the pump is an operational failure. Please tum off the unit and plug the power cord out. Check the following things:
Loading ...
Loading ...