Craftsman 917270823 Lawn Tractor

OWNER'S MANUAL - Page 9

For 917270823. Also, The document are for others Craftsman models: 917.270823

PDF File Manual, 60 pages, Read Online | Download pdf file

917270823 photo
Loading ...
Loading ...
Loading ...
HOW iO SET UP YOUR TRACTOR
CHECK BATTERY
Lift hood to raised position.
If this battery is put into service after
month and year indicated on label (label
located between terminals) charge bat-
tery for minimum of one hour at 6-10
amps. (See "BATTERY" in MAINTE-
NANCE section of this manual for
charging instructions).
INSTALL SEAT"
Adjust seat before tightening adjustment
knob.
Remove cardboard packing on seat
pan.
Place seat on seat pan and assemble
shoulder bolt. Tighten shoulder bolt
securely.
Assemble adjustment knob and flat
washer loosely. Do not tighten.
Lower seat into operating position and
sit on seat.
Slide seat until a comfortable position is
reached which allows you to press
clutch/brake pedal all the way down.
Get off seat without moving its adjusted
position.
Raise seat and tighten adjustment knob
securely.
Seat Pan
Shoulder
Bolt
Adjustment Knob
Seat
Flat Washer
INSTALL MULCHER PLATE
Install two latch hooks to mulcher plate
using screw, washer, lock washer, and
weld nut as shown.
NOTE: Pre-assemble weld nut to latch
hook by inserting weld nut from the top
with hook pointing down.
Tighten hardware securely.
Raise and hold deflector shield in up-
right position.
Place front of mulcher plate over front of
mower deck opening and slide into
place, as shown_
Hook front latch into hole on front of
mower deck.
Hook rear latch into hole on back of
mower deck.
,ACAUTION: Do not remove discharge
guard from mower. Raise and hold guard
when attaching mulcher plate and allow it
to rest on plate while in operation.
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in
a safe place. Your mower is now ready for
discharging or installation of optional
grass catcher accessory.
NOTE: It is not necessary to change
blades. The mulcher blades are designed
for discharging and bagging also.
Weld Nut From Hook Points
The Top \ Down
Lock
Weld Washer
Nut
"._j Screw
Latch
Hook
Latch
Hook
Washer
Washer
Mulcher ¥._Screw
Plate
IdNut
Lock Washer
Deflector ,_
,_r Latch
Hooks
9
Loading ...
Loading ...
Loading ...