Loading ...
Loading ...
Loading ...
P.25
P.26
Check if the door is closed tightly.
Check if power plug is inserted well.
Check if water supply tap is opened.
Check if button “On/Off” is pressed.
Check if button “Start/Pause” is pressed.
Check if the fixing bolts have been removed.
If cabinet is installed on a solid and level
floor.
Check if there are any barrettes or metal
articles inside.
Check if the legs on the washing machine
are adjusted level.
Can normally wash the clothes.
Only cannot wash with heating.
Shall contact the service center promptly.
Clean and wipe the box.
Use liquid detergents or the detergents
special for drum.
Check and fasten water pipes.
Clean up outlet hose and ask a
specialized person to repair it when
necessary.
Check if the power is shut down and
power plug is connected correctly.
If not, please call up service line.
Select a proper procedure.
Add the proper detergent quantity
according to the instructions in
detergent package.
Disconnect the power.
Fix the inlet pipe.
Replace the drain hose.
Solution
The connection between inlet
pipe or outlet hose and tap or
washing machine is not tight.
Drain pipe in the room is blocked.
The clothes are too dirty.
Insufficient detergent quantity.
The inlet pipe is not connected
firmly.
Outlet hose has water leakage.
Washing powder is dampened
and agglomerated.
NTC is damaged and heating
pipe is aging.
Machine's safety protection
design is working.
Power is disconnected.
PC board has problems.
Harness has connection
problem.
Reason
Washing machine
cannot start up
Water has
overflowed from
the bottom of the
machine
Door cannot be
opened
Detergent
residues in the
box
Washing effects
are not good
Abnormal noise
Great vibration
Heating fault
Water leakage
Indicator or
display does
not light.
Troubles
Care And Cleaning
Care and cleaning
WARNING
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door
tightly.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter threads and other foreign matter from the wash water.
Clean the filter periodically to ensure the normal operation of washing machine.
According to the soil level within the cycles and the frequency of the cycles, you have
to inspect and clean the filter regularly.
The pump should be inspected if the machine does not empty and/or spin;
The machine makes an unusual noise during draining due to objects such as safety
pins, coins etc. blocking the pump.
WARNING
To clean filter proceed as follows:
When the appliance is in use and depending on the programme selected there can be hot water
in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished
the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
Warning!
2.Turn the filter down as
shown with the figure and
take out foreign matter.
1.After the power is dis-
connected, use hand to
open the filter cover.
3.Reinstall each part back
after foreign matter is removed.
Troubleshooting Tips
Troubleshooting tips
Loading ...
Loading ...
Loading ...