Loading ...
Loading ...
Intended
Use:
Th
is product is intended for indoor residential, office,
in
dustrial
and other commercial applications.
Use
only with elect
ri
cal wiring
th
at is in good working order and that meets applicable codes
and ordinances. If you have any ques
ti
ons whether your wiring is
adequate, consult a quali
fi
ed electrician.
While using your fan, you should follow the IMPORTANT
INSTRUCTIONS
listed below.
As part
of
those instructions,
we
have used the word "WARNING"to indicate the level
of
hazard:
WAR
NING
indicates a hazard which, if not avoided, could result
in
injury or death.
IMPORTANT
INSTRUCTIONS
As with all electrical appliances, basic safety precautions should
always be
followed to
redu
ce
the risk
of
electric shock, fire,
or
injury to persons, including the following precautions:
• Read all the instructions before using this fan.
• Use this fan only as described
in
this manual. Any other use not
recommended by thd manufacturer may cause electrical shock,
fire or injury to persons.
• Do not operate the fan with a damaged power cord or after the
fan malfunctions
or
has been dropped in any manner.
• Use of extreme caution is necessa
ry
when any fan
ia
used by or
near children, disabled persons or pets and whenever the fan is
left operating unattended.
• Do not place the fan on a small, unlevel, uneven or any surface
which might allow fan
to
tip or fall. ·
•
For proper operation, fan should be placed on a smooth,
non-combustible, level surface.
• Always unplug fan when not in use, when moving from place
to place, when
assembling or disassembling parts, and before
cleaning.
• The use
of
attachments, not recommended
or
sold by the
manufacturer, may cause hazards.
• Do not use outdoors.
• Do not use
fan
in
window. Rain may cause electrical hazard
(for non-window models).
• Do not operate the fan wi
th
blade guareds or any safety device
removed.
• Avoid the use of extension cords due
to
risk
of
fire. If an
extension cord must be used, the cord must be minimum
14
AWG and rated
not
less then 1675 watts.
• Do not run power cord under carpeting. Do not cover cord with
throw rugs, runners or the like. Arrange cord away from traffic
area where it will not be tripped
over.
• Do not insert or allow any object
to
enter any openings on the
fan. Doing so may cause electric shock and /or fire hazard.
Avoid contact with moving parts.
• This appliance
is
not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities
or lack
of
experience and knowledge, unless they have
been given supervision
or
instruction concerning usr of the
appliance by a person responsible for their safety.
• Children should be supervised
to
ensure they do n
ot
play with
the appliance.
READ
&
SAVE
THESE
INSTRUCTIONS
rA\ W
·1
;JWHtJ
Sho
ck H
az
ard
Use your fan only in dry environments. This fan is not intended
for
use in a bathroom, laundry area, or similar locations,
or
near sinks,
washing machines, swimmingpools
or
other sources
of
wat
er.
Never locate fan where it
may
fall into a bathtub
or
other water
receptacle. Do
not
use in
damp
environments such as flooded
basements.
rA\~I
f
.1
;J ~
IIdCJ
H
ot
Su
rfaces
Do
not
touch fan
motor
when in use.This
motor
is
hot
when
in
use,
to
avoid
bums
,
do
not
let
bare skin touch
hot
surfaces.
rA\~1
f.
1;
H!!~lCJ
Fire Hazard
Fans have arcing
or
sparking parts inside. Do not use near
combustible materials
or
flammable gases
or
sources
of
heat.
DO NOT USE
in
areas where gasoline, paint or flammable
materials are used
or
stored. To p
re
vent a possible
fi
re, do not
block air intakes or exhaust in any manner, Do not insert
or
a
ll
ow
foreign objects to ent
er
any ventilation
or
exhaust opening as this
may
cause an electric shock, fire,
or
damage the fan.
raJNZ
·
!;UIIUtj
El
ect
ri
ca
l Sh
oc
k Ha
zard
Do
not
use
with damaged cord or plug.
Use
with adequate
electrical system that is up
to
code.
rAj
lf·1illl•Umto
Prev
e
nt
El
e
ctric
Shock
, this product
has a three prong grounded plug that
mus
t be inserted into a
matching properly grounded outlet to reduce thd risk of electrical
shock. Do not attempt to defeat this safety feature.
rA\
'N
·
!;HWltj
to
Re
du
ce
the
Ri
sk
of
Fire
or
Electric
Sh
ock,
do not use this product with any solid-state speed
control device.
DO
N
OT
operate
any
fan with a damaged cord or plug
or
after
fan malfunctions, has been dropped
or
damaged in any manner.
Do not operate fan with a broken blade, safety cage
or
any
visual
imperfections. Disconnect power before servicin
g.
For repairs
covered under warran
ty,
see warranty statemen
t.
For a
ll
other
repairs contact
Comfort Zone Customer Service by telephone
or
mail for information and assistance.
DO
NOT
run power cord
under
carpeting. DO NOT cover cord
with thr
ow
rugs,
ru
nners
or
the like. Arrange cord away from traffic
area where it will not
be tripped over. Avoid the
use
of extensi
on
cords due to risk
of
fire.
If
an extension cord
must
be used, the
cord must be minimum
14AWG
and rated not less then 1875
watts. Do
not
use an extension cord unless the plug can be
completely inserted into its receptacle.
Unplug the fan when not in
use. Do not operate fan wi
th
its ven
ti
lation obstructed.
TO
REDUCE
THE
RISK
OF
FIRE
,
ELECTRIC
,
SHOCK
,
OR
INJURY
TO
PERSON
S,
OB
S
ERVE
THE
FOLLOWING
.
a)
Installation work and electrical wiring must be
done
by
qualified person(s)in accordance with all applicable codes
and standards,
induding
fire-rated construction.
b)
When
cutting
or
drilling into wall
or
ceiling,
do
not
damage
electrical wiring and other hidden utilities.
I
nstallation
In
s
tru
c
ti
ons
Use the following information as a guideline only.
It
is the user's
responsibili
ty
to be sure the location and the wall surface can
handle the weight
of
this fan (14.6 1bs).
The wall fan
mus
t be mounted on 12 inch (300mm)thick dry and
cement-
grouted firm wall or on 4 by 5 inch wood studs I
jo
ists.
Use wall bracket as a template for locating the holes
to be
drilled.
After determining the hole locations, use an appropriate sized
drill bit and, drill holes
th
rough mounting surface.
It
is recommended that a minimum of grade 5 fasteners be
used. The
following are acceptable surfaces for mounting wall
mount assembly.
STEEL SURFACE- When mounting to a steel surface, such
as ve
rt
icall-beam,
drill through holes at pre-marked locations,
using a
9/32"
dr
ill bit. Attach wall mount assembly to mounting
surface using
1/4"-20 hex screw, in combination with 1/4" flat
washers,
1/4" lock washers, and 1/4"-20 hex nuts.
MASONRY SURFACE-When mounting to a masonry surface
use a
1/4" expansion type bolt or
114
" masonry lag with
shield designed to handle the weight
of
this fan. Drill holes
at pre-marked locations
us
ing appropriate sized drill bit
as
recommended for the fastener.
Usage
:
Fan
operation
: Always operate the fan in the
upr
ight position
following
a
ll
instructions and recommendations listed
in
this
manual.
Fan
location
: Place the fan in the area
of
the room that will
provide proper fan cooling.
Fan
co
nn
e
ction
:
wall outlet. Be sure plug
fi
ts tightly in outlet. A loose connection
may
cause overheating and
damage
to the plug
or
fan.
Note:
To
prevent overloading a
ci
rcuit,
do
not plug the fan into
a circuit that
is servicing other electrical needs.
Speed
control:
To
pperate
th
e fan, each pull
of
the string will
cycle through the followingsetti
ngs
:
• OFF
LOW
MED
HIGH
OFF
Sp
ecificatio
ns
Care
and
Ma
i
nte
n
ance
Cl
ean
in
g:
CAUTION-Before
deaning
the fan be sure
to
disconnect
power
cord from the plug. Clean the grille surface
with a clean
damp
cloth.
Do
not
use
harsh chemical or abrasive
cleaners.DO
NOT IMMERSE THE
FAN
OR ANY WIRES
IN
WATER. Replace front grille before fan use. Allow fan to dry
completely before use. Periodic grille cleaning with a vacuum
will prevent dust build up . The motor is sealed and does no
require any interior maintenance,cleaning or lubrication.
Maint
e
nan
ce:
The internal motor bearings are permanently
lubricated at the factory and
do
not
require any additional
lubrication.
Repa
ir
: DO NOT OPE
RATE
THE
FAN
WITHOUT THE GRILLE
IN
PLACE. DO NOT USE THE
FAN
IF
IT HAS MALFUNCnONED
OR BECOME
DAMAGED
IN
ANY
WAY.
S
tor
age:
Keep original carton for storage
of
the fan.
Co
il and
tie the power cord to avoid
damage
during storage.