Loading ...
Loading ...
Loading ...
When Using Air Dry
This chart shows examples of items that can be
dried using AIR DRY.
Foam rubber-pillows,
padded bras, stuffed toys
Plastic shower curtains,
20-30
tablecloths
Rubber-backed rugs 40,50
Olefin, polypropylene,
shear nylon
10-20
Reset cycle to complete drying, if needed.
• Check to see that coverings are securely stitched.
• Shake and fluff pillows by hand periodically
during the cycle.
• Dry item completely. Foam rubber pillows are
slow to dry.
NOTE: Air Dry is not available with Sensor Dry
Cycles.
Level
• Use these buttons to set dry level
• First, select sensor dry cycle.
• Select dry level to adjust how
much you want to dry the load.
As the cycle runs, the control
senses the dryness of the load
and adjusts the time
automatically based on the
selected dryness level.
0 VERYDRY
O MORE DRY
O NORMAL
O LESS DRY
0 DAMP DRY
DRYLEVEL
DRY LEVELselections can only be made while
using Sensor Dry Cycles. Selecting
MOREDry or LESS Dry automatically adjusts the
Start / Pause Button
• Use this button for start or pause.
Startingyourdryer
1. Before use
• Clean lint screen before or after each cycle.
• Place laundry into dryer and shut door. See Loading.
• Turn the knob to select the drying cycle you want.
The preset setting for Sensor Dry Cycles or Manual
Cycles will glow. The estimated or actual cycle time un
minutes, will show in the display.
Heavy Work Clothes
4 jeans 2 sweatpants
4 workpants 2 sweatshirts
4 work shirts
Cotton/Towels
10 bath towels 14 wash cloths
10 hand towels
Mixed Load
3 sheets (l king, 2 twin)
4 pillowcases
3 shirts
3 blouses
9 T-shirts
9 shorts
10 handkerchiefs
2. Loading
• Determine load size by the amount of space the load
requires rather than the weight of the load.
• Avoid overloading the dryer.
Following these instructions can help reduce your utility
bill, prolong the life of your clothes, and decrease the
likelihood of uneven drying and wrinkle.
3. To use a sensor dry cycle
• Select DRY LEVEL to adjust how dry you want
the load. As the cycle runs, the control senses the
dryness of the load and adjusts the time
automatically for the selected dryness level.
• Select the desired options.
• Press START/PAUSE
DRYLEVEL Selections can only be made while
using Sensor Dry Cycles. Selecting MORE Dry or
LESS Dry automatically adjusts the sensed time
needed.
31
Loading ...
Loading ...
Loading ...