Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 137
Suspension Display Messages Mode
The “Suspension Display Messages” setting allows
you to only display suspension warnings
Ú page 200.
NOTE:
This mode is intended to be enabled with the
ignition on.
Wheel Alignment Mode
Before performing a wheel alignment this mode
must be enabled Ú page 200.
NOTE:
This mode is intended to be enabled with the
ignition on.
If equipped with a touchscreen radio, all enabling/
disabling of air suspension features must be done
through the radio Ú page 200.
INSTRUMENT CLUSTER DISPLAY
M
ESSAGES
When the appropriate conditions exist, a message
will appear in the instrument cluster Ú page 95.
OPERATION
The indicator lamps 1 through 5 will illuminate
to show the current position of the vehicle.
Flashing indicator lamps will show a position which
the system is working to achieve. When raising,
if multiple indicator lamps are flashing while
raising the highest flashing indicator lamp is the
position the system is working to achieve. When
lowering, if multiple indicators are flashing while
lowering, the lowest solid indicator lamp is the
position the system is working to achieve.
Toggle up once will move the suspension one
position higher from the current position,
assuming all conditions are met (i.e. ignition on,
speed below threshold, etc). Toggle up can be
pushed multiple times. Each toggle up will raise
the requested level by one position up to a
maximum position of OR2 or the highest position
allowed based on current conditions (i.e. vehicle
speed, etc).
Toggle down once will move the suspension one
position lower from the current level, assuming all
conditions are met (i.e. ignition on, doors closed,
speed below threshold, etc). Toggle down can be
pushed multiple times. Each toggle down will lower
the requested level by one position down to a
minimum of Entry/Exit Height or the lowest
position allowed based on current conditions (i.e.
vehicle speed, etc.)
Automatic height changes will occur based on
vehicle speed and the current vehicle height. The
indicator lamps and instrument cluster display
messages will operate the same for automatic
changes and user requested changes.
Off-Road 2 (OR2) – Indicator lamps 1 through 5
will be illuminated.
Off-Road 1 (OR1) – Indicator lamps 2 through 5
will be illuminated.
Normal Ride Height (NRH) – Indicator lamps 3
through 5 will be illuminated.
Aero Height– Indicator lamps 4 and 5 will be illu-
minated.
Entry/Exit Height– Indicator lamp 5 will be illu-
minated.
Transport Mode – Indicator lamp 5 will be illumi-
nated. Driving above 3 mph (5 km/h) or dese-
lecting setting in the radio will disable Transport
Mode.
Tire/Jack Mode – Indicator lamps 3 through
5 will be illuminated. Driving above 5 mph
(8 km/h) or deselecting setting in the radio will
disable Tire/Jack Mode.
Wheel Alignment Mode – Indicator lamps 3
through 5 will be illuminated. Driving above
5 mph (8 km/h) or deselecting setting in the
radio will disable Wheel Alignment Mode.
4
22_WL_OM_EN_USC_t.book Page 137
Loading ...
Loading ...
Loading ...