Loading ...
Loading ...
Loading ...
Cleaning and care
27
Removing the panels and grease
filters
The grease filters and panels can fall
out when you are handling them.
This can result in damage.
Make sure you hold the filters and
panels securely at all times when
handling them.
Pull the front edge of the panels
down out of the lock, lower them
slightly, unhook them at the back,
and take them out.
To remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Cleaning the panels by hand
Follow the instructions under
"Housing."
Cleaning the grease filters by hand
Clean the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
to the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degreaser sprays
– Oven sprays
Loading ...
Loading ...
Loading ...