Loading ...
Loading ...
Loading ...
3030
“FAST HEATING” FUNCTION
To activate the “Fast Heating” function:
• Press the key
and keep it pressed until the touch control is lighted.
• Select a cooking zone by touching the relevant display of the cooking zone to be used.
• Select a setting on the selector (between “
1 ” and “ 9 ”): touch at one point to “jump” to
a specic setting or slide your nger along the selector (g. 2.7) and press for several
seconds, the operation is indicated by an acoustic signal (beep). The cooking zone
display alternates between set power level and
.
This function allows the cooking zone to operate at the maximum power (100%) for a time
proportional to the selected power level; after this time the cooking zone will operate at the
selected level.
This function is available on all the cooking zones.
While this function is operating it is possible, at any time, to increase the selected power
level but it is not possible to decrease the power; by touching the selector to a lower level
the function will be disabled.
The function will be disabled also by press the key
or by selecting the “Booster” function.
Fig. 2.15
PAUSE MODE
When at least one cooking zone is in
operation, the cooking may be paused
temporarily by touching the key (g.
2.15).
Already programmed automatic cookings
are stopped and do not continue during the
pause. The displays show a zero iterative
(the leds light up in sequence).
The pause mode may last for max
10 minutes. If the pause mode is not
terminated within the time, the cooktop
switches O automatically.
To deactivate the pause mode touch again
the key
.
The cooktop may be switched O at any
time with the On/O key; any possibly
program already set (pause mode included)
is then terminated.
IMPORTANT: It is not possible to
activate the key-lock with the pause
mode.
Loading ...
Loading ...
Loading ...