Loading ...
Loading ...
Loading ...
10
SETTING INDUCTION SURFACE CONTROLS
Figure 1
Figure 2
Figure 3 Figure 4
Figure 6
Front plus Rear
Figure 5
Front portion only
Operating the Bridge Induction
Surface Radiant Element
The cooktop is equipped with a "BRIDGE" surface
induction element located at the left front and rear (See
Figures 1 & 2) positions. The Bridge can be used when
cooking with rectangular (like a griddle) or oval shaped
cookware. The induction element will maintain an even
temperature setting across both portions of the Bridge.
If needed for normal cookware, the Bridge induction
element can work like a single induction element without
the Bridge (See Figure 5). The “single” mark on the knob
indicates that only the front portion will heat (Fig. 3).
The “bridge” mark on the knob indicates that both front
and rear portions will heat (Fig. 4). You may switch from
either setting at any time during cooking.
To Operate the Bridge Induction Element:
1. Place the correctly sized cookware of the proper
material on the induction bridge surface element.
2. Push in and turn the control knob as shown in Figure
3 to heat the front portion of the Bridge element for
normal shaped cookware or in Figure 4 for larger or
rectangular shaped cookware. Both left front and
rear elements must be OFF before activating
the bridge element.
3. Turn the knob to adjust the setting if needed. Start
most cooking operations on a higher setting and
then turn to a lower setting to nish cooking. Each
induction element provides a constant amount
of heat at each setting. Please note that not all
cookware will t the Bridge element correctly.
4. When cooking has completed, turn the surface
control knob to OFF before removing the cookware.
NOTE
See Recommended Surface Cooking Settings table on
page 8.
NOTE
The surface "Element On" indicator light will glow
when one or more induction elements are turned on.
A quick glance at this indicator light when cooking
is nished is an easy check to be sure all surface
induction elements are turned off.
Loading ...
Loading ...
Loading ...