Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM
Engine clicks but
will not start
Loss of power
1
2
3
4
1
2
3
4
5
6
CAUSE
Weak or dead battery.
Corroded battery terminals.
Loose or damaged wiring.
Faulty solenoid or starter.
Cutting too much grass]too fast.
Throttle in "CHOKE" position.
Build-up of grass, leaves and
trash under mower.
Dirty air filter.
Low oil revel/dirty oil.
Faulty spark plug.
7 D_rty fuel filter.
8 Stale or d_rty fuel.
9 Water infue[
10
11
12
13
14
15
iExcessive vibration 1
2
Engine continues to 1
run when operator
leaves seat with
attachment clutch
engaged
Spark plug wire loose.
Dirty engine air screen/fins.
Dirty/clogged muffler.
Loose or damaged wiring.
Carburetor out of adjustment.
Engine valves out of adjustment.
Worn, bent or loose blade.
Bent blade mandrel.
Loose]damaged part(s).
Faulty operator-safety presence
control system.
CORRECTION
1 Recharge or replace battery.
2 Clean battery terminals.
3 Check all wiring,
4 Check/repEace solenoid orstarter.
1 Raise cutting height]reduce
speed.
2 Adjust throttle control.
3 Clean underside of mower
housing.
4 ClearV'replace air filter.
5 Check oil level!change oil.
6 Clean and regap or change spark
p{ug.
7 Replace fuel filter.
8 Empty fuel tank and refill tank witl"
fresh, clean gasotine.
9 Empty fuel tank and carburetor,
refill tank with fresh gasol{ne and
replace fuel filter.
10 Connect and tighten spark plug
wire.
11 Clean engine air screen!fins.
12 Clean/replace muffler.
13 Check all wiring.
14 See _ToAdjust Carburetor" in
Service and Adjustments section.
15 Contact a Sears or other qualified
service center.
I Replace blade. Tighten blade bolt.
2 Contact a Sears or other
qualified service center.
3 Tighten loose part(s).
Replace damaged parts.
1 Check widng, switches and
connections. If not corrected,
contact a Sears or other
27
Loading ...
Loading ...
Loading ...