Loading ...
Loading ...
Loading ...
33
OPERATION
ENGLISH
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the
Power
button should
be pressed.
• Avoid using liquid detergent for this function.
Using the ezDispense
Use the
Dispenser 1
and
Dispenser 2
buttons to
set up and control the
ezDispense
function.
a
Dispenser 1
button
b
Dispenser 2
button
c
Liquid detergent indicator
d
Link indicator (Using only liquid detergent both
compartments)
e
Liquid fabric softener indicator
NOTE
• When the detergent or softener is insufficient;
- In case of pressing the
Power
button: The LED
will blink and the chime will sound.
- In case of running the appliance: The LED will
blink.
• The default settings are configured to dispense
the detergent of
Dispenser 1
and the fabric
softener of
Dispenser 2
.
Changing Dispense Level for a Single
Load
1
Press the
Power
button.
2
Turn the knob to select the desired cycle.
3
Press the
Dispenser 1
or
Dispenser 2
button
to increase or decrease the dispensed amount
from the set defaults.
*1 The default settings are configured to
dispense
42 ml
of detergent and
30 ml
of
softener for
4-6 kg
of normally soiled
laundry.
4
Press the
Start/Pause
button.
NOTE
• Use the manufacturer’s recommendations on
the detergent or fabric softener package when
setting the
ezDispense
amounts for a standard
4-6 kg
load.
• Most cycles will automatically use the default
amounts you have set, indicated by the Normal
LED light on the
Dispenser 1
and
Dispenser 2
buttons.
Buttons Indicator
Dispensed Amount
*1
More (110%)
Normal (100%)
Less (90%)
Off (0%)
global_main.book.book Page 33 Monday, December 13, 2021 6:17 PM
Loading ...
Loading ...
Loading ...