Loading ...
Loading ...
Loading ...
8
Fit Cooking Plates And Grates
You should fit the plate to the left-hand side of the
barbecue frame (with the drain hole to the extreme
left). The grates are fitted to the right hand side
of the barbecue frame. The temperature gauge
on the roasting hood has been calibrated for this
arrangement of plate and grate.
NOTE: The grates must always be positioned over the
Vaporizers.
The 5 burner model (4 main burners plus a side
burner) comes standard with a 320mm plate, a
320mm grill and a 160mm grill. You may use other
combinations of cooking surface, however, the plate
may cover no more than 50% of the total cooking
area.
The 6 burner model (5 main burners plus a side
burner) comes standard with one third plate and two
thirds grate and is approved for use with a maximum
of two thirds plate.
Do not cover the entire surface of the barbecue frame
with plates as this will cause severe heat damage to
the appliance.
Fit The Warming Rack
The warming rack needs no screws. It sits
on two notches on the insides of the hood.
Assembly Of Main Barbecue
The Grease Tray (Built-In Models Only)
The grease tray of the inbuilt model slides along rails located near the base of the barbecue frame. This is
different to the trolley mounted version, where the grease tray forms part of the trolley.
Otherwise, the grease tray is exactly as portrayed in the trolley mounted instructions. Newer models have a
retaining clip towards the rear of the barbecue to secure the grease tray once it is pushed in.
sl4000_0805.indd 8 14/12/2006 10:15:36 AM
Loading ...
Loading ...
Loading ...