Loading ...
Loading ...
Loading ...
Fitting the vent hose
One edge of the exhaust connector has a thread, this edge is to be aligned
with the vent on the back of the appliance. When aligned, push and twist
the end of the exhaust connector in a clockwise direction until the exhaust
connector is attached securely. You can then push the vent hose into the
exhaust connector and secure it using the jubilee clip that is supplied.
The air outlet hose must be extended directly to the outdoors.
Do not allow more than two bends in the hose and end of the hose should
not be bent, stepped on or folded between the drain and the machine.
Moisture may accumulate in the hose, it may be useful to drill a small hole
at a low point to allow the moisture to escape.
18
Vent Hose Installation
Loading ...
Loading ...
Loading ...