Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Dishwasher will not start • Dishwasher not receiving • Check electrical connection
electrical power, Fuselcircuit breaker,
• Close and latch door
• Level unit
• Door is unlatched
. Dishwasher not level
Dishes not clean
• improper loading.
• Incoming water temperature
not hot enough
Spray arm not rotating freely
• Not enough detergent andlor
improper detergent being used
• Improperly prepared dishes
• Water inlet hose kinked/bent
due to improper installation.
• Arrange dishes so spray action
reaches all surfaces
• Do not overload dishwasher,
• Increase water temperature
•Check spray arm to make sure
nothing (i e, cutlery) is obstructing
spray arm rotation,
• Check if fitter screen has
become dislodged and
obstructing spray arm rotation
- Use more dishwasher detergent
Detergent to old replace
• Do not use detergent that is
hard or caked
• Use only a recommended
dishwasher detergent.
• Excess food soil and liquids
should be removed from dishes
before loading,
. Eliminate kink or bend from
inlet hose,
Chipping or breaking
glassware
• Improper loading of dishes,
• Do not ovedoad dishrack,.Load
glasses on the upper rack only,
not over dishrack pins. Glasses
loaded over dishrack pins are
not properly supported and
subject to damage.,
Water remains in bottom
of dishwasher
• A small amount of water
(in sump area) is normal,
• Excessive amount of water;,
Cycle not completed
• This is necessary to keep the pump
primed and is drained automatically
at the beginning of each cycle
• Allow dishwasher to complete
full cycle
Loading ...
Loading ...
Loading ...