Loading ...
IMPORTANT
• Before beginning, please read these
instructions completely and carefully.
• Do not remove permanently affixed labels,
warnings, or plates from the product. This
may void the warranty.
• The installer should leave these
instructions with the consumer for future
reference.
General Information
• This unit is self-contained with a removable
water waste collection container. If using a
water hose connection, it is recommended
that a hose made of a USFDA approved
material for food contact be used. These
can be easily purchased at any marine or
camper supply store. Also, the consumer
has the option of hard plumbing if desired.
See “Optional Instructions for Hard
Plumbing Installation”.
3
– Please Read and FollowTable of Contents
Important Please Read and Follow_____________________________________________________3
General Information__________________________________________________________________3
Unpacking/Top Assembly Instructions __________________________________________________3
Dimensions (VBRS241) _______________________________________________________________4
Dimensions (VRSB410) _______________________________________________________________5
Dimensions (VPRS411) _______________________________________________________________6
Specifications _______________________________________________________________________7
Cutout Dimensions __________________________________________________________________8
Toe Kick Installation__________________________________________________________________9
Side Panel Installation ________________________________________________________________9
Back Panel Installation ______________________________________________________________10
Optional Hard Plumbing Installation __________________________________________________11
Service & Registration _______________________________________________________________12
Warranty __________________________________________________________________________13
Unpacking/Top Assembly Instructions
1. Remove all components from packaging.
2. Refer to illustration below for reference.
3. First install each shelf support into
openings on top of the main unit. Make
sure each shelf support slides all the way
to the bottom when installing in the
openings.
4. Take the top shelf and place over the
installed shelf supports.
5. Line up the appropriate screw holes.
Tighten screws until snug.
Loading ...
Loading ...
Loading ...