Loading ...
Loading ...
Loading ...
The Problem Solver
Outdoor/Indoor Refrigerotor
Questions?
Use this
problem
solver!
PROBLEM
APPLIANCE
DOES NOT OPERATE
VIBRATION OR
RATTLING (Slight
vibration is normal.)
COMPRESSOR
MOTOR OPERATES
FOR LONG PERIODS
OR CYCLES ON AND
OFF FREQUENTLY
COMPARTMENT
TOO WARM
APPLIANCE
HAS ODOR
o
o
DOOR
NOT CLOSING
PROPERLY
MOISTURE FORMS
ON OUTSIDE OF
APPLIANCE
FROST OR MOISTURE
COLLECTS INSIDE
POSSIBLE CAUSE
• Appliance is so quiet that most of the time gou will hear low or
no operating noise.
• Appliance may be in defrost cycle when compressor motor does not
operate for about 30 minutes.
• Controls are set to OFF.PressON/OFF button on control panel.
• Ifinterior light is not on, appliance may not be plugged in at
electrical outlet. Pushthe plug completely into the electrical outlet.
• The GFCIcircuit breaker is tripped. Replacefuse or reset
the breaker.
• The appliance is in showroom mode. Unplug it and plug it back in.
• Adjust the leveling legs as shown in the Installation Instructions.
• Normal when appliance isfirst plugged in.Wait 24 hours for the
appliance to completelg cool down.
• Often occurs when large amounts of food are placed in appliance.
This isnormal.
• Door left open or package holding door open.
• Hotweather or frequent door openings. This is normal.
• Temperature control set at the coldest setting.
SeeTemperature Control.
• Temperature control not set cold enough. SeeTemperature Control.
Allow 12-24 hours for temperature to change.
• Warm weather or frequent door openings.
• Door left open for long time.
• Package may be holding door open.
• Thermistor may be blocked, which can affect the overall temperature.
Thethermistor islocated on the right hand sidejust above the third shelf.
Interior needs cleaning. See Care and Cleaning.
Keepopen box of baking soda in appliance; replace everg 3 months.
Door gasket is sticking or folding over. Apply petroleum jelly
or paraffin wax to the face of the gasket.
• The door is hitting an internal component inside the appliance.
Adjust interior components to prevent interference.
• Not unusual during periods of high humidity. Wipe surface dry.
• Door left open or package holding door open.
• Too frequent or too long door openings.
• In humid weather, air carries moisture into appliance when door
is opened.
• Temperature control is set at coldest setting.
• Thermistor may be blocked, which can affect the overall temperature.
Thethermistor islocated on the right hand sidejust above the third shelf.
16
Loading ...
Loading ...
Loading ...