Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TO USE AUTO COOL FEATURE: YOU WILL SEE:
Remote
S_dl_g
DO THIS:
PRESSAUTO
C0 0 L
En_n4ysa_r
R_Omote
F;
LmGHTOn
Note: Fan speed starts at HI and adjusts to a slower
speed as the room temperature dictates,For example
if the room doesn't get too warm it will stay at the slowest
speed, If the room temperature rises quickly, such as a
door being opened, it will automatically go to the
highest speed, The fan speeds will readjust back to the
slowest speed as the room returns to the original set
temperature,Press either the fan slower or fan faster button
to adjust the fan speed manually,
TO OPERATE ON FAN ONLY: YOU WILL SEE:
c_J
En_y s_r
R @mate
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Note: Nse this function only when cooling is not desired,
such as for room air circulation or to exhaust stale air.
(Remember to open the vent during this function, but keep
it closed during cooling for maximum cooling efficiency.)
You can choose any fan speed you prefer.
During this function, the display will show the actual room
temperature, not the set temperature as in the cooling
mode.
TO USE THE
ENERGY SAVER FEATURE:
YOU WiLL SEE:
cooJ
_r3v S_er
_ !! iiI
DO THIS:
i_ PRESS
MODE BUTTON
CHOOSE
ENERGYSAVER
On
Note: In this mode, the fan will continue to run for 3
minutes after the compressor shuts off. The fan then cycles
on for 2 minutes at 10 minute intervals until the room
temperature is above the set temperature, at which time
the unit turns back on.
Loading ...
Loading ...
Loading ...