Kenmore 79641482410 Elite washer

User Manual - Page 22

For 79641482410.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
SPECIAL FUNCTIONS
CONTROL LOCK
Co,tro_Lock_ Use this option to disable the controls. The
washer can only be locked during a cycle. This
feature can prevent children from changing
cycles or operating the machine. Once set, the
controls remain locked and the Control Lock must be
turned OFF before the controls can be used again.
Once the washer has shut off, the POWER button will allow
the machine to be turned ON, but the controls will still
be locked. When the controls are locked, "CL" will display
alternately with the estimated time remaining.
Pressand hold the STAY FRESH button for three seconds to
activate or deactivate the Controt Lock.
CLEAN WASHER CYCLE
CleanWasherDetergent residue can build up in the wash
drum over time and can lead to a mildewy or
musty smell. The CLEAN WASHER cycle is
specially designed to remove this buildup
using bleach or another cleaner designed specifically for
cleaning front load washers. Run the CLEAN WASHER cycle
once a month, or more often under heavy use conditions or if
odor is present. See complete instructions in the CARE AND
CLEANING section.
_Turn ON the washer and and hold the ACCELA-
press
WASH button for five seconds. Selecting any other cycle
after CLEAN WASHER has been selected will cause the
CLEAN WASHER cycle to be cancelled.
Fill the bleach the MAX line with
dispenser
to
liquid
chlorinebleach.Do not overfillthebleach dispenser.
Overfilling will cause the bleach to dispense immedi-
ately.
@
NOTE: For other drum cleaning products, follow
the cleaner manufacturer's instructions and
recommendations. For powdered cleaning products,
add the cleaner to the main wash compartment of
the dispenser drawer. Place tablet cleaners directly
into the drum.
Press the START/PAUSE button to start the cycle.
O fter the cycle has ended, secure the door slightly ajar
with the door magnet. This will promote air circulation
and allow the interior of the machine to dry. To use this
feature, close the door just until it contacts the door
magnet.
NOTE: Do NOT use this cycle with clothes, and do
NOT add detergent or fabric softener.
MY CYCLE
MY CYCLE allows you to store a customized wash
cycle for future use. It allows you to save favorite
temperature, spin speed, soil level, and other
options for a cycle, and then recall them at the touch of a
button.
NOTE: You can only save a setting for one cycle at a
time. Pressing and holding the MY CYCLE button will over-
write any previously saved cycle.
To save a MY CYCLE:
Press the POWER button to turn on the washer.
O Turn the cycle selector knob to select the desired cycle.
Pressthe CYCLE MODIFIER button to adjust the cycle as desired.
O ress the CYCLE OPTION button to add the desired options.
Press and hold the MY CYCLE button for three seconds.
To
@
0
recaff a MY CYCLE:
Press the POWER button to turn on the washer.
Pressthe MY CYCLEbutton. The stored settings will be
displayed.
Press the START/PAUSE button to start the cycle.
NOTE: MY CYCLE can be adjusted the same as any
other cycle. However, once any other button is pressed,
the LED will turn off indicating that the settings are no
longer those of your saved cycle. Press and hold the MY
CYCLE button for five seconds to overwrite the previous
MY CYCLE settings and replace them with the current
settings.
AUTO SOAK
Use the AUTO SOAK option to presoak
garments to help remove dif:ncult spots or
stains on fabric. This option provides a
30-minute presoak prior to the start of the
selected cycle. At the end of the presoak time, the select-
ed cycle will use the same water.
To use the AUTO SOAK feature, press and hold the
STEAM TREAT button for five seconds.
SAVE ENERGY
SaveEnergyO This option saves energy by using cooler water
while increasing the wash and rinse times to
maintain wash performance. This feature is only
......................................................available with the NORMAL/CASUAL and
HEAVY DUTY cycles as listed below.
To use the Save Energy option, press and hold the Pre Wash
button for three seconds.
* NORMAL - Hot becomes Warm
. NORMAL- Warm becomes Cold
"HEAVY DUTY- Hot becomes Warm
22
Loading ...
Loading ...
Loading ...