Craftsman 917270860 lawn tractor

User Manual - Page 32

For 917270860.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
PROBLEM CAUSE
Mower blades will not Obstruction in clutch
rotate mechanism.
CORRECTION
Remove obstruction.
Worn/damaged mower Replace mower drive belt.
drive belt.
Frozen idler pulley, Replace idler pulley.
Frozen blade mandrel. Replace blade mandrel,
Poor grass discharge Engine speed too slow.
Headlight(e) not
working (if so
equipped)
Battery will not charge
Loss of Drive
Engine "backfires"
when turning engine
"OFF"
Travel speed toofast.
Wet grass.
Mower deck not level.
Low/uneven tire air
pressure,
Worn, bent or loose blade.
Buildupof grass,
leaves and trash under
mower.
Mower drive belt worn.
Blades improperly
installed.
Improper blades used.
Clogged mower deck
vent holes from buildup
of grass, leaves, and
trash around mandrels.
Switch is=OFF".
Bulb(s) burned out.
Faulty lightswitch.
Loose or damaged
wiring.
Blown fuse.
Bad battery cell(s).
Poor cable connections.
Faulty regulator (ifso
equipped).
Faulty alternator.
Freewheel control in
=disengaged" position.
Motion drive belt worn,
damaged or broken.
Air trapped in transmiss-
ion during shipment or
servicing.
Engine throttle control
not set at "SLOW"
positionfor 30 seconds
before stopping engine.
Place throttle control in
=FAST"position.
Shiftto slower speed.
Allow grass to dry before
mowing.
Level mower deck.
Check tires for proper air
pressure.
Replace/sharpen blade.
Tighten blade bolt.
Clean underside of mower
housing.
Replace mower drive belt.
Reinstall blades sharp edge
down.
Replace with blades listed
in this manual.
Clean around mandrels to
open vent holes.
Turn switch"ON".
Replace bulb(s).
Check/replace lightswitch.
Check wiring and connec
tions.
Replace fuse.
Replace battery.
Check/clean all connec
tions.
Replace regulator.
Replace alternator.
I
Place freewheel control in
"engaged" position.
Replace motion drive belt.
Purge transmission.
Move throttle controlto
=SLOW" position and allow
to idlefor 30 seconds before
stopping engine.
32
Loading ...
Loading ...
Loading ...