Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/92822459-1-107-278-0/bg5.png)
English 5
CAUTION
When connecting to water supply mains,
local regulations of your municipal water
company must be observed. In some ar-
eas connecting directly to public drinking
water supply may require a backfl ow pre-
vention device. This is to ensure that there
is no feedback of chemicals into the water
supply. Use a water fi lter to avoid potential
damage from dirt in the water supply.
■ Garden hose must be at least 5/8 inch
diameter.
■ Flow rate of water supply must not fall
below 4.0 GPM (gallons per minute)
■ Flow rate can be determined by running
the water for one minute into an empty
5-gallon container.
■ The water supply temperature must not
exceed 122°F/50°C.
■ Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
■ Always prevent debris from being drawn
into the unit by using a clean water source.
Use additional water fi lter.
■ Do not operate pressure washer without
the water turned on.
Hardware (included)
Description Purpose Illustration Qty
A
Knob Joint Assembly 2
B
5/16" X 1 3/4
Bolt
Joint Assembly 2
C
5/16" X 2" Bolt Hose Holder Assembly 1
D
Hose Holder Hose Holder Assembly
1
E
High Pressure
Hose
Spray Gun Assembly 1
ASSEMBLY INSTRUCTIONS
WATER SUPPLY (Cold Water Only)
Loading ...
Loading ...
Loading ...