Loading ...
Loading ...
Loading ...
Installing Your Refrigerator
How to Level Your Refrigerator
If your refrigerator requires an ice maker water supply connection, proceed to How to connect the water supply
section before leveling your refrigerato_,
[ CAUTION
To protect persona_propertyor unit from damage, observe the following:
• Protect soft vinyl or other flooring with cardboard, rugs, or other protective material
, Do not use power tools when performing beveling procedure.
J
Maten;alsNeeded • _1_"box head driver • Level
HI,..,,H I I .Im.llnl.l,.I
( l and plug in p°wer,, cOrd" !
2
Remove toe gl_lle
and bottom cover(s)
3
Turn left and _ght adjustment \
screws (.4) to r_se or lower _
_ont of ref_gerator.
• Make sure refrigerator cabinet is level
from side to side by adjusting [eftand
right roller adjustment screws.
• Turn stabilizing leg clockwise until firmly against
floo_,
For Pullout Drawer Models: After completing
the above listed steps, turn roller adjustment
screws (A) 2 to 3 times counterclockwise, so
that full weight of unit rests on stabilizing legs
insure proper placement.
• Snap bottom portion into place first, Press
down on top part of grille until top portion snaps
into place,
How to Adjust the Temperature Controls
This refrigerator is designed to operate at a household temperature of 55_ to 110°F (13° to 43_ C) For initial temperature
setting, follow all five steps listed below if doing a simple temperature modification for an operational unit, only steps 3
through 5 are required
Hm.. i HHHHI I I I I
compartment and freezer controls at top of _eezer section.
Set both controls to 4.
IMPORTANT: ,,,,,Neithersection will cool if freezer control is set to Off.
liHi llllllll ill Hllll i
•_ i i Hi H ,i,,, i HHHHHI,
, Turn control to next highest number if too warm
• Turn control to neXt lowest number if too cold
A!tow 5 to 8 hours for adjustments to take effect.
. H . i i H.H. m..HH.m
(4 to see that re[zl_era;or seC'tio;"'is 38 ° to 40 ° F (3 ° to 4 ° C)l
. Turn control to next highest number if too warm _ - l
Turn control to next lowest number if too cold ---_'L_-- /
, .,,,,,,,Allow5 to 8 hours for adjustments,to take,effect t_ , )
H,H HI HI
(5 Re pea t Steps .' i_f_ 4# as i]ecess_
11
How do I perform
a temperature test?
Materials needed
2 thermometers measuring -5*
to 50°F (-21° to 10°C)
• 2 drinking glasses
For Freezer
• Place thermometer in g_ass of
vegetable oil in middle of freezer
and continue with step 3 of
Temperature Adjustment section
IMPORTANT: Always start temperature
adjustments with freezer section,
For Refrigerator
• Piece thermometer in glass of
water in mlddle of unit and
continue with step 3 of
Temperature Adjustment section.
Loading ...
Loading ...
Loading ...