Loading ...
Loading ...
Loading ...
Accessory Caddy Assembly
Locate the two 5-1/4" wheel assemblies
and the two dual wheel casters in the car-
ton. The casters are designed to fit in the
front of your new accessory caddy and
the larger wheels fit the rear of the caddy.
To Install the Wheels/Casters
1.Place the accessory caddy upside
down on a flat surface as illustrated.
2. Insert the dual wheel casters into the
bottom of the accessory caddy as
shown (2 places).
3. Push on the caster until the flange on
the caster stem is inserted all the way
into the socket. You wilt be able to hear
the flange snap into the socket. The
caster will swivel easily when position-
ing is correct.
4. Position the dove tail portion of one of
the wheel assemblies into the acces-
sory caddy as illustrated. Tap the wheel
support into the accessory caddy with a
soft mallet. Repeat for the second
wheel assembly.
5. Turn the accessory caddy upright.
This completes the assembly of your 16
gallon wet/dry vac accessory caddy.
The caddy is now ready for the sixteen
gallon drum of your Craftsman wet/dry
vac.
To Install Your Vac Drum Onto
the Caddy
1. Place the caddy (now fully assembled)
in the upright position (all four wheels
positioned on the floor).
2. Locate the drain on your wet/dry vac
drum. When the drum is positioned into
the vac caddy, the drain must be cen-
tered between the two front dual wheel
casters. There are two mounting posts
in the caddy that must press into the
mounting holes of the drum (see illus-
tration). When properly oriented, the
drum may be pressed down and a small
tab located in the caddy wilt snap into
the drum below the drain. A distinct
snap wilt be heard indicating you have
completed the caddy assembly.
NOTE: Since your wet/dry vac caddy is
designed for permanent attachment to the
drum, it is not necessary to remove the
vac from the accessory caddy when dis-
posing of debris.
Drum
Loading ...
Loading ...
Loading ...