Loading ...
Loading ...
Loading ...
7
Reversing the Door Swing (Units with suffix TB, HV, CSS, and IF are not user-
reversible)
If you find the direction of opening the door of the appliance inconvenient, you can change it. Holes
on the opposite side have already been prepared at the factory.
This appliance can be opened from either the right side or the left. By default, the door hinge is on
the right side. If you prefer it on the left, please follow these instructions:
1. Take off the upper hinge cover from the door and remove the screws that hold the top hinge.
2. Lift the hinge straight up to free the hinge pin from the socket in the top of the door.
3. Lift the door up and away to free its bottom socket from the hinge pin.
4. Remove the screws to the bottom hinge.
5. Remove the decorative caps from the opposite side and plug the holes from the original side with
the decorative caps.
6. Move the bottom hinge to the opposite side and tighten the screws. Use any lock washers or nuts
if they were installed in the original installation.
7. Replace door onto the hinge pin on the bottom hinge. Place top hinge pin into door. Insert screws
into the top hinge and tighten.
8. Check the gasket. It should not be creased and should seal well.
Switching the Door Handle
The door has two screw holes on each side, allowing you to move the handle from one side to the
other. To do so, unscrew the handle from its original location and align the handle with the screw
holes on the opposite side. Fix the handle in place with the screws, then cover the screw heads with
the handle seal.
Loading ...
Loading ...
Loading ...