Greenworks 2123502VT User Manual

Loading ...

Spool

cover

Bump

head

3. Put the cutting line through the hole. Push the cutting line

until it exits the opposite hole.

Hole

4. Pull the cutting line through until there is an equal

quantity of cutting line on each side.

5. Turn the spool cap counterclockwise to wind the cutting

line into the trimmer head. Keep approximately 5 in of

cutting line on each side of the trimmer head.

10.5 REPLACE THE BUMP KNOB

1. Push the tabs on the sides of the trimmer head at the same

time.

2. Pull and remove the spool cover.

3. Remove the spool.

4. Hold the bump knob and firmly pull it out.

5. Put the new bump knob onto the spool.

11 TRANSPORTATION AND

STORAGE

WARNING

Remove the battery pack from the machine before

transportation and storage.

11.1 MOVE THE MACHINE

When you move the machine, you must:

• Stop the machine.

• Remove the battery pack.

11.2 STORE THE MACHINE

• Remove the battery pack from the machine.

• Make sure that children cannot come near the machine.

• Keep the machine away from corrosive agents such as

garden chemicals and de-icing salts.

• Secure the machine during transportion to prevent

damage or injury. Clean and examine the machine for any

damage.

English

Loading ...

Greenworks 2123502VT 80V 13-inch String Trimmer, Battery and Charger Not Included