Loading ...
Loading ...
Loading ...
Additional programme settings en
25
■ Programme settings,
■ Detergent dosage (additional rinse
cycles if required due to foaming),
■ Load size/type of textiles (longer
washing for higher load and for
textiles which absorb more water),
■ Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
■ Fluctuations in power supply,
■ Water pressure (infeeding speed).
\ Additional programme
settings
Additional programme settings
The available settings vary depending
on the model.
You can find an overview of all settings
available for selection in each
programme on the supplementary sheet
for the operating and installation
instructions.
Speed Eco
(G F, G Speed/F Eco Perfect,
Speed Eco)
Button with two possible settings for
adapting the selected programme:
■ Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the Speed
setting.
Note: Do not exceed the maximum
load.
■ Eco
Energy-optimised washing by
reducing the temperature and
increasing programme duration
while achieving a washing result that
is consistent with the selected
programme, without the Eco setting.
If you press the Speed Eco button once,
you select the Speed setting. If you
press the button again, the Eco setting
is activated. The respective symbol is
shown in the display when the setting is
activated. If you press the button again,
no setting is activated.
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Notes
■ The washing machine must be
correctly installed and connected.
~ "Positioning and connecting"
on page 11
■ Before washing for the first time, run
a wash cycle without laundry.
~ "Before washing for the first
time" on page 17
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Loading ...
Loading ...
Loading ...