Loading ...
Loading ...
Loading ...
Saving Energy
Saving energy is important and helps you save money. This section gives you tips on the
best ways to save energy with your dishwasher.
Loading tips
* Wash full loads. Running a half-filled
dishwasher uses the same amount of
electricity and hot water as a fully-loaded
machine.
* Load correctly for best washing results.
Incorrect loading may cause poor washing
and the need to rewash all or part of a load.
* Do not prerinse normally soiled dishes.
Select the correct cycle for the load and
use the recommended amount of
detergent.
Cycle and option tips
* Use the Low Energy/China cycle whenever
possible. The cycle uses less hot water and
energy than the Normal cycle.
* Run your dishwasher during off-peak hours.
Local utilities recommend avoiding heavy
usage of energy at certain times of day.
* Do not use the High Temp Wash option if it
is not needed. When this option is off,
if water entering the dishwasher is lower
than 140°F (60°C), the cycle does not take
additional time to heat water during the main
wash. In some cases, loads may not dry as
well when using the High Temp Wash
option.
NOTE: Loads may not wash or dry as well
if the water temperature is too low. For best
dishwashing results, water must be at least
120°F (49°C) as it enters the dishwasher.
* Use the Air Dry option whenever possible.
Allow longer drying times (overnight). Use a
rinse agent to improve drying.
To check water temperature:
1. Run the hot water at the faucet closest to
your dishwasher. Let the water
run for at least 1 minute.
2. Hold a candy or meat thermometer in
the running stream of water.
If water temperature at the
faucet is below 120°F (49°C),
have a qualified person raise
the water heater's thermostat
setting.
24
Loading ...
Loading ...
Loading ...