Loading ...
Loading ...
Loading ...
QUICK START GUIDE
Steam Model Shown
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
This Use & Care Guide covers several different models. Your dryer may not have all of the cycles and features described.
USINGAUTO CYCLES
Automatic Cycles automatically match
the cycle setting to the type of load and
adjust drying time for optimal performance.
See the Cycles information on the following
pages for more detad on each cycle.
1. Clean the lint screen.
2. Place laundry nnthe dryer. Shut the door.
3. Press Power.
4. Select an Automatic Cycle.
5. Select the WRINKLE SHIELD feature, if desired.
6. Press and hold START to begin.
To make changes during an Automatic Cycle:
1. Press PAUSE/CANCEL
2. Select DRYNESS LEVEL or Option.
3. Press and hold START to begin.
NOTE: For the SanltEze Cycle (on some models), to ensure
sanlhzatlon, do not interrupt the cycle.
USING MANUAL CYCLES
Use Manual Cycles to set a dryung time
and temperature. See the Cycles
mformatmon on the following pages
for more detail on each cycle.
1. Clean the lint screen.
2. Place laundry unthe dryer. Shut the door.
3. Press Power.
4. Select an Manual Cycle.
5. Press the Dry Time up or down buttons until the desired drying
time Is @splayed.
6. Press TEMPERATURE until the des,red temperature glows.
7. Select the WRINKLE SHIELD feature, ff desired.
8. Press and hold START to begin.
USING STEAM CYCLES
(Steammodelsonly)
Steam Cycles use water and heat to
reduce wnnkles and odors =ndry utems.
See the Cycles informataon on the follow=ng
pages for more detail on each cycle.
1. Press Power.
2. Select a Steam Cycle.
3. Press and hold START to begin.
Stopping Your Dryer
To stop your dryer at any time
Press PAUSE/CANCEL twice or open the door.
Pausingor Restarting
To pause the dryer at any time
Open the door or press PAUSE/CANCEL once.
To restart the dryer
Close the door and press and hold START button until dryer starts.
Loading ...
Loading ...
Loading ...