Loading ...
Loading ...
Loading ...
Place Heat Diffusers, Cooking Grates, and Warming Rack into the Firebox Assembly
[] Place the Heat Diffusers (F) into the Firebox Assembly (A). Ensure the fronts of the Heat
Diffusers, marked "FRONT", are at the front of the firebox.
[] Place the Grates (E) into the Firebox Assembly (A). Each grate has a small knob on each
corner. The knobs should rest on the front or back panels of the firebox. The 2 small
and 1 large grates can be inserted in any order.
[] Place the Warming Rack (D) into the slots along the top of the Firebox Assembly (A) as
shown.
_1_ Place LP Cylinder into the Cabinet
[] Put the Cylinder Support Ring (R) into two holes in cabinet tubes, unhook the cylinder
support ring and hold at top of cabinet.
[] Place the LP cylinder down into the tank support hole in the bottom of the cabinet. Ensure
the valve faces to the front. Wrap the cylinder support ring around the top of the tank and
hook to secure the LP cylinder in place. See Inset 1.
[] Unscrew the bolt and nut on the left side cabinet panel and attached the left side cabinet
panel to Cylinder Support Ring using the unscrew bolt and nut. See Inset 2.
Ensure the regulator hose goes through the regulator hose support ring.
Do Not Hook Up the LP Cylinder to the Regulator Assembly at this time.
Inset 1
0
Cylinder Support Ring Regulator Hose Support Ring
]8
Loading ...
Loading ...
Loading ...