Loading ...
Loading ...
Loading ...
To reduce the risk of fire, electric shock, or injury to persons, read the FMPORTANT
SAFETY INSTRUCTFONS before operating this appliance.
Operation of Current
Device
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or offi
• Always make sure the RESET button is pushed in for correct operation.
• The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or
it cannot be reset. A new one can be obtained from the product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. FtMUST be replaced by one obtained from
the product manufacturer.
Key Features
(On some mode0
MumtFStep Fan and Cooming Speeds:
90 distinct fansettings give the ultimate inairflow and noise control,
Low VoBtage Compensation:
Ensuresaganist evaporator freeze-ups at low supply voltage conditions,
Air Conditioner Features ELEOTRONmC CONTROL OPERATmNG INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and
all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the
unit contro_ a_one or with the remote.
ON/OFF
ADJUSTS
TEMP &
TmMES
SETS
MODES
REMOTE CONTROL
UGHT
ADJUSTS
TEMPERATURE <
ORTIME
ACTIVATES
TIMER
FAN CHECK FI_ER--
SPEEDS RESET BUTTON
ACTIVATES
TIMER
SETS MODE
D_SPLAYS
TEMPERATUREf'DME
FAN SPEED
SETS FAN SPEEDS
AUTO COOL FEATURE
SLEEP MODE
TURNS UNiT
ON OR OFF
UNiT CONTROL
SZ000400(En)-Yaokong 5 12/10/2004, 5:36 PM
Loading ...
Loading ...
Loading ...