Loading ...
Loading ...
Loading ...
8
Since each car has a different way of fixing the unit and the location of the screws are different,
there is no defined way to fix the unit. You may consult the fixing method of the original unit. If it was
fixed by tightening screws with the steel angle, you can unload the steel angle of the original unit to both
sides of our unit, then use the electrician tape to tight the steel angle (since screw hole size is probably
unmatched). If the original unit was fixed with iron frame, you can fix the iron frame of our unit in the car
first, and then push the unit to fasten it. If the size is not fit, you can wrap the unit with electrician tape to
increase the volume of the unit, and then put it in and fasten it. Or you can think of a better way to fix
it, but anyway, you can fix it.
7>How to install the navigation antenna?
First you should tighten the screws of the navigation antenna and the unit. Then you must fix the
navigation antenna module in a place that has sunlight or on the windshield. (That's very important
because poor installation will affect navigation signals.)
8>The default factory mode password
Factory mode password: 8888. (Different products, the password may be different)
9>The default Bluetooth Pin Code
Bluetooth Pin Code : 0000/1234
4. Schematic diagram of reversing camera wiring
There is a separately Camera Input, please do not connect to RCA cable.
Here's the complete steps of camera wiring.
Loading ...
Loading ...
Loading ...