Loading ...
Loading ...
Loading ...
Setting Surface Controls
OPE TING THE SMNGLESURFACE D[ANT
ELEMENTS
I I B ! I B | ! I E I ! B a B B [] i [] [] ! []
The cooktop has single radiant surface elements at 2 locations; the right and left
rear (Figs. 1 & 2) element positions,
To Operate the Single Surface Element
2.
,
.
5.
,
Place correctly sized cookware on the radiant surface e}ement.
Touch and hold the (_) key pad unti} a beep sound. The power indicator light
POWER
above the (_ will turn ON. Note: If no other key pad is touched within 20
FOYER
seconds the request to Power ON the cooktop will clear.
Touch and hold the (_ pad for the desired element position until a
beep is heard, The display will show" -- ".
Note: if no further pads are touched within 10 seconds the request
to power the element ON will clear.
Touch _ pad once to turn ON the power level to HI, Touch
pad once for Lo.
Each touch of the _ or _ pad wi}l decrease or increase the
power level from 9.0 through 3.0 by .5 increment, Simmer power
levels between 3.0 and 1,0 will decrease or increase by .2
increment. Lo is the lowest power level available.
Note: The power level may be adjusted at any time while the element is ON.
When cooking has been completed touch the O pad once to turn the element OFF
and if no other surface element is used touch the (_ key pad to turn off the cooktop,
R:_ER
Each surface element provides a constant amount of heat at each setting. A g}owing
red surface heating area extending beyond the bottom edge of the cookware indicates
the cookware is too small for the surface heating area.
Note: The HE message will remain ON if the cooktop is still hot and will remain ON until
the heating surface area has cooled sufficiently.
Fig, 1
Fig. 2
t_Ja ur ace
ess, wi ,I tul
veL _igJass
_|c_ li_ ht
em_ ,sm
ON i_v_
ted )ยข1_
aJ ear
c_ _nu
til erk
F.
c_ ss_
S_ he_
tc esu
i
Loading ...
Loading ...
Loading ...