Loading ...
Loading ...
Loading ...
Surface Cooking
Lighting Instructions
Your surface burners ate lighted by electric ignition,
eliminating the need for standing pilots with
constantly bus'ning flames.
In case of a power failure, you can light the surface
burners on your range with a match_ Hold a lighted
match to the burner, then tus'n the knob to the LITE
position° Use extreme caution when lighting burners
in this manner.
Surface burners in use when an electrical power failure
occurs will continue to operate normally°
The electrode of' the spark igniter is exposed. When
one busner is mr'ned to LITE, a/! the burners spark.
Do not disassemble ot clean around any burner while
another bus'her is on. An electric shock may result,
which could cause you to knock over hot cookware.
Surface Burner Controls
The toaobs that turn the surface burners on and off are
located on the control panel in front of' the burners.
The two knobs on the left control the left front and
left rear burners. The two knobs on the right control
the right f_ont and right rear burners.
On ranges with sealed burners:
. The smaller burner (right rear position) will give
the best simmer results. It offers precise cooking
performance for delicate foods, such as sauces or
foods which need to cook over low heat for a
long time. It can be turned down to a very low
simmer setting.
" The right fi'ont burner is higher powered than the
others and will bring liquids to a boil quicker
(natural gas installations only).
Before Lighting a Burner
" If' drip pans are supplied with your range, they
should be used at all times_
- Make sure all grates on the range are in place before
using any burner.
Loading ...
Loading ...
Loading ...