Loading ...
Loading ...
Loading ...
25
REVERSING DRYER DOOR SWING (OPTIONAL)
Remove the Door Assembly
1.
Place a towel or soft cloth on top of dryer or work space
to avoid scratching of the surface.
2.
Remove 3 of the 4 screws that hold the door hinge on the
front panel of the dryer. Partially loosen the remaining screw
with keyhole opening and lift the door off the screw.
3.
Lay the door assembly on a previously prepared at surface
with the inside (inner door assembly) facing up, and remove
6 phillips-head screws to release outer door assembly from
inner door assembly.
NOTE: It is important that you remove only the 6 indicated
screws.
4. Lift the inner door assembly off outer door assembly.
5. Remove 4 Phillips-head screws to release center insert from
outer door ring.
6. Lift and rotate center insert 180 degrees.
7. Reassemble the center insert and outer door ring with the
4 screws
Loading ...
Loading ...
Loading ...